Adjusting Print Driver Settings; Overview Of Key Driver Settings - Oki proColor pro900DP Series Manual

Adjusting Print Driver Settings

3.0
An initial test of 10-15pages is recommended to check feeding, print
quality and ensure reliable printing throughout the run.

Overview of Key Driver Settings

3.1
Key driver settings include:
Selecting the proper page size
Making sure the Media Source is the Manual Feed path (from the
feeder)
Turning off media check functions
Selecting the correct media weight (this is a key for reliable feeding,
image transfer and fusing).
Color and resolution adjustments
The Basic Tab Set-up
After choosing the correct page size, ensure the following are selected in
the Basic tab of the driver.
o Page Source – should be set to Multi-purpose Tray. This is
where the feeder is connected.
o Output Bin – should be set to Stacker (Face-up). This is where
the conveyor is located.
o Collate – generally, this should be set to 'No', and should
always be set this way for a single image printed many times.
______________________________________________________________________________________
Pro900DP Set-Up and Print Overview
11