Oki proColor pro900DP Series Manual page 13

The Paper Source Tab Set-up
In the Paper Source tab. Select the Media Type that most closely
matches the media being used.
After choosing Media Type in the Paper Source tab, ensure the following
are selected.
o Auto Tray Switch – this should be set to 'Off' so that when
media from the feeder is empty the printer does not attempt to
pick pages from the other media trays.
o Media Check – this should be set to 'Off' so the system does not
continuously validate the thickness and attempt to adjust
temperature (this can slow printing considerably, depending on
the type of printing)
o Media Weight – please refer to next section (3.2) for specifics
on the media weight settings.
Note: The Basic tab can be set-up (using the 'Customization' button) to
keep all the most used settings for the pro900DP in one place. Refer to
the Fiery Printing for Windows Reference (on CD) for more details.
______________________________________________________________________________________
Pro900DP Set-Up and Print Overview
Bond paper
Card Stock
Glossy Finish
Labels
etc.
12