Lenovo ThinkPad T410i Hardware Maintenance Manual page 61

Table 7. Status indicators (continued)
Indicator
5
Device access
6
Power on
7
Numeric lock (On-screen
indicator)
8
Serial Ultrabay Slim device
status
9
Caps lock
10
Battery status
Meaning
Green:
Data is being read from or written to the hard disk drive, the
diskette drive, or the drive in the Serial Ultrabay Slim device.
When this indicator is on, do not put the computer into sleep
(standby) mode or turn off the computer.
Note: Do not move the system while the green device access light is on.
Sudden physical shock could cause drive errors.
Green:
The computer is on and ready to use. This indicator stays lit
around the power-on button whenever the computer is on and
is not in sleep (standby) mode.
By default, when the numeric lock is on, the numeric lock indicator is
displayed on the screen.
Green:
A Serial Ultrabay Slim device is installed and in use.
Blinking green:
A Serial Ultrabay Slim device is in the process of being detached.
Turn off:
A Serial Ultrabay Slim device is ready to be attached or
detached.
Green:
Caps Lock mode is enabled. To enable or disable Caps Lock
mode, press the Caps Lock key.
Green:
The battery has more than 20% charge.
Orange:
The battery has between 5% and 20% charge.
Fast blinking orange:
The battery has less than 5% charge.
Note: The battery may be charging.
Slow blinking orange:
The battery is being charged. When it reaches 20%, the blinking
color changes to green.
Slow blinking green:
The battery has between 20% and 80% charge, and charging
is continuing. When the battery reaches 80% charge, blinking
stops, but the charging may continue until the battery is 100%
charged.
.
Chapter 5 Status indicators
55