Lenovo ThinkPad T410i Hardware Maintenance Manual page 109

When installing: Make sure that connectors are firmly attached and route the cables as shown in the
following figure.
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
Note: If the Windows Authentication label (COA)
with the label attached to the customer, or provide a letter to the customer stating what the label was
originally on the system and what the label part number, serial number, and product key were.
When you replace the base cover, you need to apply the following label:
18
Homologation label
The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
2
Qualcomm Wireless WAN label
3
Ericsson wireless WAN label
4
Wireless LAN MAC address label
5
MAC address label
6
SIRM labels
7
Israel label (76.3 mm x 31.6 mm)
8
Wireless card label (only for Brazil)
9
Modem label (only for PRC model)
10
Bluetooth label (only for Brazil)
11
China wireless WAN label
1 is attached to a part that is replaced, return the old part
Chapter 8
.
Removing and replacing a FRU
103