Run The Autobuild Process - Escient FireBall E-120 Installation And User Manual

Run the Autobuild Process

FireBall manages CD libraries on external changers through an initial identification
process Escient calls "Autobuild". During this process, FireBall contacts the Gracenote
CDDB database to gather data about each of the CDs in your collection. This information
includes Artist, Songs/Titles, and Cover Art.
To initiate an Autobuild, load the changer(s) with discs and close the door or, if
the discs are already loaded, open and close the changer(s) doors. FireBall will
immediately initiate a connection to the CDDB database on the Internet to get the data
for your collection. Processing time will vary based on changer brand and models and
the number of CDs in your music collection.
When complete, the guide screen will be updated with a CD group on the filter bar and
all music available from the attached CD changer(s) will be identified by a CD icon to
the left of the title/artist/track that it recognizes. Some CDs may not be recognized, and
in that instance, FireBall attaches a generic "style/genre of music" cover and generic text.
F B I & U ' G
IRE ALL NSTALLATION SER S UIDE
We recommend that you do not inter-
rupt the Autobuild process. Please
allow enough time (see note below)
for the process to complete.
2
The length of time it takes to
complete the Autobuild process is
dependent upon changer brand and
model. In addition, please allow ap-
proximately 30-60 seconds per disc
for the actual information processing.
This means that a fully loaded 200-
disc changer could potentially take
200 minutes.
C 3 - G
HAPTER
- M22001-01A1
S
ETTING TARTED
P 70
AGE