Running Quick Start - Escient FireBall E-120 Installation And User Manual

Running Quick Start

u
It will be easier if you use the wireless keyboard for this procedure. After you
are done with Quick Start, you can use any of the input devices: remote or
keyboard. (You cannot use the touch panel during the Quick Start procedure.)
v
If you have an Internet Service Provider (ISP), gather the following information:
• Access or Dialup Number
• Screen Name or Login Name
• Login Password
• Name of ISP
FireBall has a simple interface menu so that you can easily select and configure
your connection on an existing account. Most other ISPs are supported if they
use standard PPP type connections. If you do not know if your ISP supports this
standard (Point to Point Protocol), simply call the provider and ask. If you do
not have an Internet Service Provider (ISP), please sign up for one before
proceeding to step 3.
w
Press Power on the wireless keyboard or on the FireBall front panel. If you are
using the remote, press the FB source button first, then press the Power key.
2
You can use the remote to get through
the Quick Start procedure, but it will be
easier using the wireless keyboard since
you may have to enter text and numeric
information on some of the menus and
screens.
2
Free Internet Service providers (ISPs)
do not use standard, consistent methods
of Internet connectivity and do not open
their networks to outside users. Escient
has set up an out of the box offer with
AOL. You can sign up for AOL Internet
access by following the instructions on
the QuickStart screens.