Connecting To Hpna Networks (Fireball) - Escient FireBall E-120 Installation And User Manual

Connecting to HPNA Networks (FireBall)

FireBall has an HPNA jack that can be used to connect to the internet through and HPNA
enabled PC with Internet connection sharing. (Minimum and maximum length cabling
requirements are found in Appendix G - Home Networking.)
u
Use the Telephone Cable.
(Can be identified by see-through connectors. This
is the smaller of the two cables with see-through
connectors, also known as an RJ-11 cable)
v
Connect one end of the telephone cable to the FireBall HPNA jack.
w
Connect the other end of the telephone cable to a Telephone Wall Jack.
F B I & U ' G
IRE ALL NSTALLATION SER S UIDE
2
Connecting to the Internet
using Ethernet requires an
HPNA to Ethernet Bridge, such
as the Escient Broadband Kit.
In addition, certain minimum
and maximum length cabling
requirements must be met.
Please see Appendix G - Home
Networking for additional
information.
C 2 - S
HAPTER
- M22001-01A1
U F B
ETTING P IRE ALL
P 41
AGE