What Is The Setup Process - Escient FireBall MP-100 Installation And User Manual

F B -MP I & U ' G - M22002-01A1
IRE ALL NSTALLATION SER S UIDE

What Is The Setup Process?

Setting up a FireBall-MP is very easy once the FireBall Server is connected to an
ethernet network and properly configured.
Upon power on, FireBall-MP will try to automatically locate and connect to a FireBall
server. Please refer to your FireBall's User's Guide for instructions on properly
connecting the FireBall Server to an Ethernet network.
If a FireBall server is not located, the FireBall-MP will continue to scan the network until
a server is found. You should check your FireBall server's power status and Ethernet
connetion. The FireBall-MP and FireBall Server must be on the same Ethernet network.
Note: FireBall-MP can only connect to one FireBall Server at a time.
C 3 - G S
HAPTER ETTING TARTED
P 44
AGE