To Change Internet Configuration Settings - Escient FireBall E-120 Installation And User Manual

To Change Internet Configuration Settings

u
Press the SETUP key on the remote control or keyboard. The FireBall SETUP
main menu displays.
v
Select the menu item
w
Select the sub-menu item you want to modify and follow the instructions on the
screen.
network connections
The Primary connection is used for all Internet and OpenGlobe enhanced
services such as disc lookups, purchasing, internet radio, etc., and the Secondary
connection is used for connecting the FireBall to other FireBalls, and to use
the Pipeline PC software. The Secondary connection may be different from the
Primary connection. Note: FireBall E will show "Ethernet TCP/IP Settings"
only.
dial-up settings
manually change it here for dial-up access PPP accounts. The password appears
as visible text when the field is empty AND you enter the password. Once you
leave the password field, the password field changes to hidden text. Subsequent
returns to this screen will show the password as hidden text. Specific dialing
options for your location can also be set here such as Dial-up Numbers and
Dialing Prefix.
internet configuration
- Specifies the Primary and Secondary TCP/IP Settings.
- This item is originally configured in Quick Start but you can
. The menu displays.
F B I & U ' G
IRE ALL NSTALLATION SER S UIDE
2
If you backspace at any point while
in the password box, the entire
password is erased.
C 8 - C
HAPTER
- M22001-01A1
F B
USTOMIZING IRE ALL
P 137
AGE