Connecting To Your Fireball; Setting Up The Fireball Server - Escient FireBall MP-200 User Manual

Connecting to Your FireBall

FireBall uses a type of file server commonly called "Windows Networking" or "CIFS/SMB".
CIFS/SMB networking is found in most Microsoft operating systems and allows PCs to connect
and share files over a network.

Setting up the FireBall Server

Before you can connect to your FireBall you must configure FireBall's server settings. Follow
these steps to configure your FireBall server:
1. Using your FireBall remote, press SETUP to display the Setup Menu.
2. Select the NETWORK menu item.
3. Select the SERVER SETTINGS menu item to display the Server Settings screen.
4. Enter a name for your FireBall using the remote or keyboard. Do not use spaces in the
name.
5. Select the SAVE button to save your settings.
6. Press SETUP again to exit the Setup menus.
6640 Intech Blvd. Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Server Settings screen
PC Integration WD044-1-3
3/8/2006