To Change Com Port Settings - Escient FireBall MP-100 Installation And User Manual

To Change Com Port Settings

u
Press the SETUP key on the remote control or keyboard. The SETUP main
menu displays.
v
Select the menu item
w
Select the sub-menu item you want to modify and follow the instructions on the
screen.
com port settings -
the communication ports were automatically detected. If you attach additional
equipment use this screen to indicate which of the 2 com ports are used by an
optional touch panel, external control system, or Elan system.
calibrate touch panel
device to be calibrated.
x
Exit SETUP by selecting the EXIT menu item located at the bottom of the main
menu, or by pressing the SETUP key when on the main menu or any sub-menu.
. The menu displays.
com ports
During the Quick Start setup, touchscreens attached to
- Allows an attached ETP-1000 touch screen display
F B -MP I & U '
IRE ALL NSTALLATION SER S
2
The LEFT, and RIGHT ARROW
keys on the remote or keyboard
are used to position the screen
horizontaly.
C 7 - C
HAPTER USTOMIZING
G - M22002-01A1
UIDE
F B -MP
IRE ALL
P 89
AGE