Setting The Host Mode For The Disk Array Ports - HP XP1024 System Configuration Manual

Setting the host mode for the disk array ports

After the disk array is installed, you must set the host mode for each disk array port to
match the host OS. Set the host mode using LUN Manager in Remote Web Console XP
(shown), Command View XP, or Command View XP Advanced Edition. If these are not
available, the HP service representative can set the host mode using the SVP.
The host mode setting for Novell Netware is OA. The host modes must be set for certain
middleware environments (for example, Novell High Availability Server, NHAS, System
Fault Tolerance, SFT III).
13
HP StorageWorks Disk Array XP operating system configuration guide Novell Netware