Mounting The New Volumes - HP XP1024 System Configuration Manual

Mounting the new volumes

NetWare 5.x
1.
From the Installation Option screen, click Volume options to display the volume
list and volume options, and then click Mount/Dismount an existing volume and
press ENTER.
2.
On the Directory Services Login/Authentication screen, enter the NetWare
administrator password, then press ENTER.
3. An informational message displays the number of new volumes just added. Press
ENTER to continue.
4.
You are now prompted to select the desired mount action. Click either Mount all
volumes or Mount volumes selectively as desired.
The mount status for all volumes is now displayed.
5.
If you chose to mount volumes selectively, select the desired volume, press ENTER to
mount the volume, and then confirm that the volume's status changed to MOUNTED.
Repeat this step for each new volume to confirm that all new volumes can be
mounted successfully.
6.
When you have confirmed that all new volumes/devices were mounted successfully,
you are finished with disk array device configuration. Leave the new volumes
mounted for now, so you can verify that NetWare clients can access the new
volumes.
NetWare 6.0
1. Using ConsoleOne select the targeted server, right click, and click Properties.
2. Click the Media tab, and click NSS Logical Volumes.
3.
Click New, enter a name for the volume, then click Next.
4.
In the Create Logical Volume - Storage Information window, select the desired
pool/device, enter the desired Volume Quota, then click Next.
5. In the Create Logical Volume - Storage Information window check Activate and
Mount in the "On Creation" box, then click Finish.
6.
Confirm that the logical volume has been created.
7.
Map the created Logical Volume as the Network Drive.
8. Confirm the mapped drive.
HP StorageWorks Disk Array XP operating system configuration guide Novell Netware
25