Install Cluster Services - HP XP1024 System Configuration Manual

• One client running Windows 98 with Novell Client v4.83 or later.

Install Cluster Services

1. Bring up all servers that will be in the cluster.
2. Log into a client as Administrator.
3. Insert the NetWare 6.x CD in the CD drive of the client.
4. Start Cluster Services installation:
Select Start and Run.
Enter "D: \ NWDEPLOY.EXE" and click OK (where D: points to the CD drive).
Double-click the Post-Installation Tasks folder.
Click Install or Upgrade a Novell Cluster.
Click Next on the NetWare Cluster Services for NetWare 6.0 Installation window.
5.
Create the new cluster:
Select Create New Cluster on the NCS Action window,
Click Next.
Enter a Unique Cluster Object name (for example, Cluster_Object).
Click Browse.
Double-click to open the tree that contains the cluster servers.
Select the server context within the tree (Novell), and click OK.
Click Next.
6. Add servers to the cluster:
Click Browse.
Highlight all of the servers that you want to add and click Add to Cluster. You may
use the shift and control keys to select multiple nodes.
After all servers in the cluster appear on the list, click Next.
Wait while NWDeploy accesses each node.
After all services have been accessed and added to the "NetWare Servers in
Cluster" list, click OK.
7. Enter a unique IP address for the Master_IP_Address_Resource (for example,
10.1.1.5) in the Cluster IP Address Selection window and click Next.
8. Set up the shared media:
Verify that Yes is selected next to "Does the cluster have shared media?"
30
Middleware configuration