HP Surestore 64 - Director Switch User Manual page 267

Message
Send firmware operation failed.
SNMP trap address not defined. An SNMP trap address must be defined if a community name is
Director must be offline to
configure.
Message
The add firmware process was
aborted.
The data collection process
failed.
The data collection process was
aborted.
The HP EFC Server is busy
processing a request from
another Product Manager
The Ethernet Link dropped.
The firmware file is corrupted.
This firmware version already
exists.
The IPL configuration cannot be
deleted.
Cause/Solution
Send firmware has failed. Retry the operation. If the condition
persists, contact support personnel.
defined. Define an SNMP address.
The director must be offline to configure Fibre Channel
operating parameters. Set the director offline and reconfigure
the Fibre Channel operating parameters.
Cause/Solution
User has ended the add firmware process. N/A. An
informational message.
An error occurred in the data collection process. Contact
support personnel.
User has ended the data collection process. N/A. An
informational message.
The HP EFC Server could not process the current request
because it is busy handling a request from another Product
Manager. Retry the operation later. If the condition persists,
contact support personnel.
Link was dropped by the director. Retry the operation. If the
condition persists, contact support personnel.
A firmware file has corrupt data. Contact support personnel.
Firmware version already exists in the database. N/A. An
informational message.
Deletion of the IPL address configuration was attempted and
was not allowed. Cancel the operation.
251