HP Surestore 64 - Director Switch User Manual page 249

Variable Provides
BBCreditMin Minimum number of receive buffers available for holding a class 1 connect-
request, or class 2 or class 3 frames from the attached N_Port.
RxDataFldSzMax Maximum size in bytes of the data field in a frame that the F_Port is capable
of receiving from its attached N_Port.
RxDataFldSzMin Minimum size in bytes of the data field in a frame that the F_Port is capable
of receiving from its attached N_Port.
Cos Value indicating the set of classes of service the F_Port is capable of
supporting.
Intermix Flag indicating if the F_Port is capable of supporting the intermixing of class
2 and class 3 frames during a class 1 connection. This flag is only valid if the
port is capable of supporting class 1 service. Fixed at no (2).
StackedConMode Value indicating the mode of stacked connect request that the F_Port is
capable of supporting. Fixed at none (1).
C2SeqDelivery Flag indicating if the F_Port is capable of supporting class 2 sequential
delivery.
C3SeqDelivery Flag indicating whether or not the F_Port is capable of supporting class 3
sequential delivery.
HoldTimeMax Maximum holding time (in microseconds) the F_Port is capable of
supporting. (Not supported.)
HoldTimeMin Minimum holding time (in microseconds) the F_Port is capable of
supporting. (Not supported.)
BaudRates Value indicating the set of baud rates the F_Port is capable of supporting.
Media Value indicating the set of media the F_Port is capable of supporting.
233