Installing Advanced Performance Monitoring; Overview; Installing Through Telnet - HP StorageWorks 8B - FC Entry Switch User Manual

Installing Advanced Performance Monitoring

This chapter provides the following information:
•

Overview

•

Installing Through Telnet

•
Installing through Web Tools
Overview
To enable Advanced Performance Monitoring, you must install a license on each switch that will
use this feature. For information on obtaining license keys for an FC Entry Switch 8B or FC Switch
8B, visit the HP Web site at
keys for an FC 16B, visit the HP Web site at
Note:
You can install an Advanced Performance Monitoring license through telnet commands or through
Web Tools, if a Web Tools license is installed.
Version 3.0 of Advanced Performance Monitoring requires an FC Entry Switch 8B, FC Switch 8B,
or FC 16B switch with Fabric OS version 3.0.1b or later installed.
Installing Through Telnet
1. Log on to the switch by telnet (see the Fabric OS Procedures Guide Version 3.0 for details),
using an account that has administrative privileges.
2. Type licenseShow on the telnet command line to determine whether an Advanced
Performance Monitoring license is already installed on the switch.
A list of all the licenses currently installed on the switch displays. For example:
admin> licenseShow
If the Advanced Performance Monitoring license is not included in the list, continue with
step 3.
3. Enter the following on the command line:
licenseAdd "key"
Advanced Performance Monitoring User's Guide
on page 2-1
on page 2-1
http://www.hp.com/support/fc8B
A license may have already been installed on the switch at the factory.
1A1AaAaaaAAA1a:
Zoning license
QuickLoop license
on page 2-2
. For information on obtaining license
http://www.hp.com/support/fc16B
Chapter
2
.
2-1