HP StorageWorks XP12000 - Disk Array Owner's Manual page 25

Item
Label
5
REMOTE
MAINTENANCE
PROCESSING
6 REMOTE
MAINTENANCE
ENABLE/DISABLE
7
BS-ON
8 PS-ON
9 PS ENABLE
Description
Indicator
LED
During normal operation, this LED may be
(Amber)
on if remote maintenance is allowed (the
REMOTE MAINTENANCE ENABLE/DISABLE
switch is in the ENABLE position).
ON: Remote maintenance is in progress.
An HP support representative is probably
working on the system, but the system is online
and accepting data.
Used to permit remote service mainte-
Switch
nance. During normal operation, this switch
should be in the ENABLE position.
DISABLE: No one can pro-
vide remote maintenance.
ENABLE: An HP support representative
can provide remote maintenance.Do not change
the switch position unless directed to do so by
HP service personnel.
LED
During normal operation, this LED should be on.
(Amber)
ON: The disk array is plugged in and
receiving power from the primary AC outlet.
The SVP is receiving power from the outlet.
OFF: The disk array is not receiving power from
the primary AC outlet. Check the electrical
outlets in your building.
LED
During normal operation, this LED should be on.
(Green)
ON: The PS ON/OFF switch is on. If the
SUB-SYSTEM READY light (1) is also on,
the disk array is ready to receive data.
OFF: The PS ON/OFF switch is off and the disk
array is not ready to receive data.
Switch Used to enable the PS ON/OFF switch
(10). During normal operation, this
switch should be in the "Disable"
position (opposite the ENABLE position).
ENABLE: The PS ON/OFF switch can be used.
DISABLE: The PS ON/OFF switch cannot be
used. Do not change the switch position unless
directed to do so by HP service personnel.
HP StorageWorks XP12000 Disk Array
25