1170 System Board Assembly - Lenovo ThinkPad Edge 15 Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for ThinkPad Edge 15:
Table of Contents

Advertisement

Table 26. Removal steps of top shielding assembly (continued)
1
M2 × 2 mm, wafer-head, nylon-coated (1)
2
M2 × 3 mm, wafer-head, nylon-coated (2)
3
M2 × 5 mm, wafer-head, nylon-coated (4)

1170 System board assembly

Important notices for handling the system board:
When handling the system board, bear the following in mind.
• The system board has an accelerometer, which can be broken by applying several thousands of G-forces.
Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench
can subject the accelerometer to as much as 6,000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or
composite.
• If a system board is dropped, you must test it, using PC-Doctor for DOS, to make sure that the HDD
Active Protection System
Note: If the test shows that HDD Active Protection System is not functioning, be sure to document the
drop in any reject report, and replace the system board.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or
conductive corrugated material.
After replacing the system board, run PC-Doctor for DOS to make sure that HDD Active Protection System
still functions. The procedure is as follows:
1. Place the computer on a horizontal surface.
2. Run Diagnostics ➙ ThinkPad Devices ➙ HDD Active Protection Test.
Attention: Do not apply physical shock to the computer while the test is running.
For access, remove these FRUs, in order:
"1010 Battery pack" on page 58
"1020 Optical drive or travel cover" on page 58
"1030 Thermal cover" on page 59
"1040 Hard disk drive (HDD) assembly" on page 60
"1050 DIMM" on page 61
"1060 Fan assembly" on page 63
"1070 CPU" on page 66
• "1080 Wireless WAN slot cover and PCI Express Mini Card for wireless WAN" on page 67
"1090 Palm rest assembly with cables" on page 69
"1100 PCI Express Mini Card for wireless LAN" on page 72
"1110 Backup battery" on page 74
"1120 Bluetooth daughter card (BDC-2)" on page 75
"1130 Keyboard" on page 75
"1140 Keyboard bezel" on page 78
TM
still functions (see below).
0.181 Nm
Silver
(1.85 kgfcm)
Black
0.181 Nm
(1.85 kgfcm)
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing or replacing a FRU
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents