Lenovo ThinkPad Edge 15 Hardware Maintenance Manual page 87

Table 25. Removal steps of LCD unit (continued)
1
M2.5 × 6.5 mm, wafter-head, nylon-coated (2)
When installing: Make sure that the connectors are attached firmly to the system board.
4
In step , release wireless antenna cables from the cable guides.
When installing: Make sure that the cables are attached to the cable guides firmly .
Attention: When you route the cables, make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Black 0.392 Nm
(4 kgfcm)
.
Chapter 8 Removing or replacing a FRU
81