1060 Fan Assembly - Lenovo ThinkPad Edge 15 Hardware Maintenance Manual

1060 Fan assembly

For access, remove these FRUs in order:
• "1010 Battery pack" on page 58
• "1030 Thermal cover" on page 59
Attention:
• Do not handle the fan roughly. Improper handling of the fan can cause distortion or deformation and
imperfect contact with components.
• Do not touch or apply any excessive force to the fan motor. It might cause damage to the fan assembly or
the computer to mulfunction.
Table 13. Removal steps of fan assembly
When installing: Make sure that the fan connector is attached firmly to the system board.
Note: Loosen the screws
order.
For Thinkpad Edge 15" and E50:
2a 2f
to in order, but do not remove them. When you attach the fan, secure the screws in
.
Chapter 8 Removing or replacing a FRU
63