Pin Codes Do Not Match Is Displayed; Other Troubleshooting Tips; Forgotten Or Do Not Know The Access Point Name/Network Name (Ssid), Security; The Machine Is Not Detected After The Network Environment Is Changed - Canon PIXMA MX340 Network Setup Troubleshooting

PIN codes do not match is Displayed

Action
The message appears when setup is not completed within
10 minutes.
Follow the procedure below to configure WPS settings
again.
1
Select PIN code method on the WPS screen, then press the OK button.
• A new PIN code appears.
2
Set the new PIN code to the access point or computer.
• For details on how to set PIN codes to the access point or computer, refer to the manual
supplied with your access point or contact its manufacturer.


Other Troubleshooting Tips

Forgotten or Do Not Know the Access Point Name/Network Name
(SSID), Security Protocol (encryption standard), and Network Key
Check
Check the access point settings.
• For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.

The Machine is Not Detected after the Network Environment is Changed

Check
Wait until the IP address is assigned to the computer. You may need to restart your
computer.
• Search for the machine again after confirming a valid IP address is assigned to the computer.
Glossary
• IP address
A numerical identification assigned to each computer or network device connected to a network.