HP StorageWorks D2D100 - Backup System User Manual page 7

Time required to recharge
battery
Duration of battery backup
Battery life expectancy
Type of edge connector
PCI Express support
PCI Express transfer rate
Number of SAS ports
SAS transfer rate
For more information about the controller features and specifications, and for information about system
requirements, refer to the HP website (http://www.hp.com/products/smartarray).
From 15 minutes to two hours, depending on the initial battery charge
level
More than two days if the battery is fully-charged and less than three
years old
More than three years
PCIe x8 (fits in slots that have a physical size of x8 or greater;
operates at the speed rating of the slot, up to a maximum of x8)
2.5 Gb/s PCI Express
2.0 GB/s peak bandwidth
Two internal wide ports; each port has four 1x connectors
1.2 GB/s per wide port peak bandwidth
Hardware features 7