Hardware features
In this section
Board components ................................................................................................................................... 5
Controller specifications ............................................................................................................................ 6
Board components
Two models of the HP Smart Array P400 Controller are available. One model
the front of the
the other model
back of the board.
SAS/SATA connectors on the front of the board
Item ID
1
2
3
4
5
board" on page 5) has the internal SAS/SATA connectors on the front of the board, while
("SAS/SATA connectors on the back of the
Description
SAS or SATA port 2I (internal), 4x wide SFF8484 connector.
SAS or SATA port 1I (internal), 4x wide SFF8484 connector.
Connectors for the cache module (also known as BBWC or
array accelerator).
Runtime LEDs. To interpret the illumination pattern of these
LEDs, see "Controller board runtime LEDs (on page 32)".
Cache module, showing the connector for the cable to the
optional battery pack.
The cache module must be installed on the controller before
the controller is installed in a server, or the controller will not
boot.
("SAS/SATA connectors on
board" on page 6) has the connectors on the
Hardware features 5