Using Orca - HP StorageWorks D2D100 - Backup System User Manual

Supported features
Uses a wizard to suggest the optimum configuration for
an unconfigured controller
Describes configuration errors
Supported procedures
Creation and deletion of arrays and logical drives
Assignment of RAID level
Sharing of spare drives among several arrays
Assignment of multiple spare drives per array
Setting of stripe size
Migration of RAID level or stripe size
Configuration of controller settings
Expansion of an array
Creation of multiple logical drives per array
Setting of boot controller

Using ORCA

Power up the server.
1.
POST runs, and all controllers in the server are initialized one at a time in the current boot order
sequence. If a controller is connected to one or more hard drives, an ORCA prompt message
appears during the initialization process for that controller.
At the ORCA prompt for the controller that you want to configure, press the F8 key.
2.
The ORCA main menu appears, enabling you to create, view, or delete a logical drive.
To create a logical drive using ORCA:
Select Create Logical Drive.
1.
The screen displays a list of all available (unconfigured) physical drives and the valid RAID options
for the system.
Use the Arrow keys, Spacebar, and Tab key to navigate around the screen and set up the
2.
logical drive, including an online spare drive if one is required.
ACU CPQONLIN
+ +
+ --
ACU CPQONLIN
+ +
+ +
+ +
+ +
+ +
+ +
+ +
+ +
+ +
-- --
ORCA
--
--
ORCA
+
+
--
--
--
--
--
--
--
+
Configuring an array 14