Sas/Sata Connectors On The Back Of The Board; Controller Specifications - HP StorageWorks D2D100 - Backup System User Manual

SAS/SATA connectors on the back of the board

Item ID
1
2
3
4
5

Controller specifications

Feature
Card type
Dimensions (excluding bracket)
Drive types supported
Maximum power required
Temperature range
Relative humidity
(noncondensing)
RAID levels supported
Battery kit option part numbers
Description
Connectors for the cache module (also known as BBWC or
array accelerator).
SAS or SATA port 1I (internal), 4x wide SFF8484 connector.
Runtime LEDs. To interpret the illumination pattern of these
LEDs, see "Controller board runtime LEDs (on page 32)".
SAS or SATA port 2I (internal), 4x wide SFF8484 connector.
Cache module, showing the connector for the cable to the
optional battery pack.
The cache module must be installed on the controller before
the controller is installed in a server, or the controller will not
boot.
Details
Low-profile PCI Express
16.8 cm
3.0 Gb/s SAS or 1.5 Gb/s SATA
Approximately 14 W
Operating, 10° to 55°C (50° to 131°F)
Storage, -30° to 60°C (-22° to 140°F)
Operating, 10% to 90%
Storage, 5% to 90%
0, 1, 1+0, and 5; also RAID 6 (ADG) if the battery kit option (next
entry) is used
Battery pack 390936-001; battery cable 399034-001
7.0 cm 1.8 cm (6.61 in 2.75 in 0.7 in)
Hardware features 6