HP Compaq CQ58-200 Maintenance And Service Manual page 119

Country/region
The United States
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 0.75mm
coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region
where it will be used.
2. The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL
mark. UL file number must be on each element.
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75mm
wall plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75mm
and wall plug) must bear the CCC certification mark.
5. The flexible cord must be Type H05VV-F 3X0.75mm
on each element. Corset approval number and logo must be printed on a flag label.
6.
The flexible cord must be Type HVCTF 3X1.25mm
and wall plug) must bear the BSMI certification mark.
7. For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL
and CSA or C-UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3X0.75/1.00mm
plug BS 1363/A with BSI or ASTA marks.
112 Chapter 8 Power cord set requirements
Accredited agency
UL
2 conductor size. Power cord set fittings (appliance
2 conductor size. Power cord set fittings (appliance coupler
2 conductor size. KTL logo and individual approval number must be
2
conductor size. Power cord set fittings (appliance coupler, cable,
Applicable note number
2
2 or 1.25mm 2 conductor size. The
2
conductor size, with