HP Compaq CQ58-200 Maintenance And Service Manual page 101

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
●
Fan/heat sink assembly (see
To remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
94 Chapter 4 Removal and replacement procedures
Battery on page 34), and then remove the following components:
WLAN module on page
Hard drive on page 47)
Keyboard on page 53)
Top cover on page 57)
Speakers on page 65)
USB board on page 67)
Power connector cable on page
Display assembly on page
System board on page
Fan/heat sink assembly on page
42)
69)
71)
81)
87)