Nikon COOLPIX P7100 Reference Manual page 52

The Setup Menu
Option Description _"_
TV settings
External mic
sensitivity
Built-in ND filter
Customize command
dials
Multi selector right
press
Delete button options
AE/AF lock button
Fnl + shutter button
Select this option if no image is displayed on a TV even
when the audio/video cable or HDM[ cable is
connected to the TV. HDMI device control is used for
setting whether or not the camera receives signals from
a TV when the TV that conforms to the HDMI-CEC
standard is connected with an HDMI cable.
Set the sensitivity of the external microphone. The
default setting is Auto.
• When the sensitivity of the microphone is low, set
the option to High.
When the camera's built-in ND filter is used, the amount
of light that enters the camera can be reduced while
shooting. Use this feature in situations such as when
overexposure results from the subject being too bright.
The defauff setting is Off.
• In shooting modes other than
P, S, A, M, U1,U2,
U3 and _ (low noise night) modes, the built-in ND
filter is controlled automatically according to the
shooting mode and shooting conditions, regardless
of the setting.
Switch the functions that can be operated using the
main command dial and sub<ommand dial for
shooting pictures.
• The default setting is No swap.
When set to AF area mode (default setting), when the
multi selector i_ ([+]) is pressed during shooting, the AF
area mode setting ([_)50) is displayed.
In order not to display the AF area mode setting even
if • ([+]) is pressed, set to Off.
When set to Press twice to delete, the image can be
deleted by pressing the "_ button again while the
delete confirmation message is displayed.
The default setting is Disable second press.
Select the function to be performed when the _ (AE-
L/AFA) button is pressed during shooting. When set to
AE/AF lock button (default setting), both focus and
exposure are locked if the J_:E (AE-L/AF-L) button is
Dressed while shooting.
• Not available when the scene mode is Scene auto
selector ([_)40).
Set the function to be performed when the shutter-
release button is pressed while pressing the
Fnl
(FUNC1) button during shooting.The default setting is
off.
_84
_84
_85
_86
_86
_86
_87
_88
3
107