Nikon COOLPIX P7100 Reference Manual page 39

Using ViewNX 2
Transferring Images to the Computer
1 Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the included USB
Cable UC-E6 and then turn the camera on.
m
E _
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SDcard reader:Connect a card reader(avai]ableseparatelyfrom third-party
suppliers) to the computer and insert the memory card.
Ira message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is displayed,
follow the steps below to select Nikon
Transfer 2.
1 Select Nikon Transfer 2 for Import
pictures and videos. Under Import
pictures and videos, click Change
program. A program selection dialog will be displayed; select Import File using
Nikon Transfer 2 and dick OK.
2 Double-clicklmport File.
If the memory card contains a large number of images, it may take a while for Nikon
Transfer 2 to start. Wait until Nikon Transfer 2 starts.
_1_ Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USBhub,
94