Table of Contents
Advertisement
Connecting
the Camera to a TV (Playback
on a TV)
Operations
with TV Connection
While pictures are displayed full frame on the TV, the previous or next picture can
be viewed by dragging your finger across the camera monitor.
Thumbnail playback ([_ 31) and playback zoom ([_
31) are possible just as with
playback mode on the camera.
When the first frame of a movie is displayed, the movie can be played back by
holding your finger on the camera monitor and removing it after about one
second.
• Tap the camera monitor to turn TV display offand display the picture in the
camera monitor. When pictures are displayed in the camera monitor, tap the
icons to operate the camera (in playback mode only).
• Pictures will be automatically displayed on the TV in the following situations.
No operations are performed for a few seconds in playback mode.
A slide show is played back.
A movie is played back.
Notes
on Connecting
the
HDMI
Cable
• HDMI cable is not provided.
Use a commercially
available
HDMI cable to connect
the camera
to a
high definition
TV. The output
terminal
on this camera
is an HDMi mini connector
(type C). When
purchasing
an HDMI cable, be sure that the device end of the cable is an HDMi mini connector.
• An Image
mode
([.]_ 62) setting
of _ 2048x1536
or higher and a Movie
options
(_
75)
setting
of 7"_
HD 720p
(1280x720)
or higher are recommended
for shooting
pictures
or
movies that will be played
back on a TV via HDMI connection.
_1_
Connecting
theCable
• Do not connect
the HDMI cable and auctio/video
cable to the camera
simultaneously.
• Do not connect
the HDMi cable and USB cable to the camera
simultaneously,
If the
Pictures
Are
Not
Displayed
on the
Television
Be sure that the camera's
video
mode
setting
con_rms
to the standard
used by your television,
The video mode setting
is specified
from the TV settings
(0"5 91 ) option
in the setup menu ([.]_ 88),
[]
Using
a TV
Remote
Control
(HDMI
Device
Control)
The remote
control
of an HDMI CEC compatible
TV can be used to control
playback,
It can be used instead of the camera's
touch
panel to select pictures,
start and pause movie
playback,
scroll
playback
of pictures
taken using easy panorama,
and switch
between
full screen
playback
mode
and 6 image
thumbnail
display,
• Set HDMI
device
control
(_
91) of TV settings
to On (default
setting)
in the camera's
setup
menu
and then connect
the camera
and TV using an HDMI cable,
• Aim the remote
control
at theTVwhen
operating
it,
• Refer to the documentation
included
with the TV for information
about
the TV's HDMI C£C
compatibility.
0"537
R
d)
n
Advertisement
Table of Contents
