Table of Contents
Advertisement
Basic Shooting
Settings
Using the Flash (Flash Modes)
You can set the flash mode
to match
the shooting
conditions.
1
Tap the
flash
mode
icon.
8
2
Tap the
desired
flash
mode
icon.
• See "Available Flash Modes" (_
55) for more
information.
• To quit without changing the setting, tap the
flash mode icon again. If you tap any other
icon, the setting screen for that item is
displayed.
3
Frame
the
subject
and take
a picture,
Flash indicator
• The flash indicator shows flash status when
_
......................................................................
the shutter-release
button is pressed halfway.
On: Flash will fire when the shutter release
button is pressed all the way down.
Blinks: Flash charging. Wait a few seconds
and try aga in.
01_:
Hash
will
not
fire.
'I_'_2
_)
• If the battery is low, the monitor will turn off,
and remain off, while the flash charges.
54
[]
Effective
Range
of the
Flash
When IS© sensitivity
is set to Auto, the flash has a range of 0,3 3,5 m (1 ft 11 ft) at the maximu
m
wide
angle zoom
position
and a range of 0.5 2.2 m (1 ft 8 in, 7 ft 2 in,) at the maximum
telephoto
zoom
position,
Advertisement
Table of Contents
