Programmed Ttl Auto Flash Shooting (With Nikon F-501/N2020, F-401/N4004 Or F-301/N2000) - Nikon Autofocus Speedlight SB-22 Instruction Manual

Programmed TTL Auto Flash Shooting (with Nikon F-501/N2020, F-401/N4004 or
F-301/N2000)
Steps 7 through 9 provide instructions for programmed
TTL auto flash shooting with the Nikon F-501/N2020*,
F-401/N4004** or F-301/N2000* camera.
For other flash exposure operations (TTL auto, non-TTL
auto and manual flash exposure operations) see "SET­
TING CAMERA SHUTTER SPEED" on page 16 and
"DETERMINING APERTURE," pages 17 to 32.
* The Nikon N2020 and N2000 are sold exclusively in the
U.S.A. and Canadian markets.
** The Nikon N4004 is sold exclusively in the U.S.A. market.
For programmed TTL automatic flash opera­
tion, note the following:
• Use Al-S type lenses only. With Nikon F-401/
N4004, use only AF-Nikkor lenses, except
AF-Nikkor 80mm f/2.8, 200mm f/3.5 IF-ED
and Autofocus Converter TC-16/TC-16A.
• For autofocus operation, set the Nikon
F-501/N2020's focus mode selector to S for
Single Servo Autofocus mode, or set the
Nikon F-401/N4004 to A for autofocus mode.
For details, see pages 13 to 15.
— — — — —
7
Set the SB-22's flash mode selector
' ' \ o
TTL.
For the flash shooting range in programmed TTL auto­
matic operation, see the table on page 20.
The patterned bar in the middle of the flash shooting
distance range indicators also shows the flash shoot­
ing range in programmed TTL automatic operation.
To read the programmed aperture, set the film speed
knob. The figure at the left of the patterned bar is the
programmed aperture.
'