Turning The Camera On And Off 2 - Nikon COOLPIX L820 Reference Manual

Turning the Camera On and Off
• Remove the lens cap and turn tile camera on.
• When the camera is turned on, the power-on lamp (green) lights and then the monitor
turns on (the power-on ]amp turns offwhen the monitor turns on).
• To turn off the camera, press the power switch. When the camera turns off, the power-on
lamp and monitor turn off.
• You can press and hold the [] (playback) button to turn on the camera and switch to
playback mode. The lens does not extend.
[] Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor turns off, the camera enters standby mode,
and the power on lamp flashes, If no operations are performed for appro×, another three minutes,
the camera turns off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the following
operations:
, Press the power switch, shutter release button, II_ (shooting mode) button, [] (playback)
button, or • (_ movie record) button
Flashes
No operations
performed
®e®e®e®e_
No operations
performed
3 rain
Camera enters Camera turns off.
standby mode.
• The time that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu (_ 96),
• By default, the camera enters standby mode in about 30 seconds when you are using shooting
mode or playback mode,
J
te
t_
o
oo
o_
23