HDMI Licensing LLC. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal and noncommercial use of a consumer to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a...
Page 3
Introduction Parts of the Camera The Basics of Shooting and Playback Shooting Features Playback Features Recording and Playing Back Movies General Camera Setup Technical Notes and Index...
Introduction Read This First Thank you for purchasing the Nikon COOLPIX L810 digital camera. Before using the camera, please read the information in “For Your Safety” (A viii) and familiarize yourself with the information provided in this manual. After reading, please keep this manual handy and refer to it to enhance your enjoyment of your new camera.
“Parts of the Camera” (A 1). About the Included “Reference Manual CD” A PDF version of the COOLPIX L810 Reference Manual can be found on the included CD. Refer to it for more detailed information. Viewing the “Reference Manual CD”...
Page 6
Other Information • Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used in this manual: Icon This icon indicates cautions and information that should be read before using the camera. This icon indicates notes and information that should be read before using the camera.
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Page 8
• Nikon will not be held liable for any damages resulting from the use of this product. • While every effort was made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).
Page 9
• Comply with copyright notices The copying or reproduction of copyrighted creative works such as books, music, paintings, woodcut prints, maps, drawings, movies, and photographs is governed by national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws.
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Page 11
When replacing the batteries with EN-MH2-B2 batteries (available separately), purchase two sets (total of four batteries). • The EN-MH2 rechargeable batteries are for use with Nikon digital cameras only, and are compatible with COOLPIX L810. • Insert batteries in the correct orientation.
Page 12
Should the insulation be damaged and the wires become exposed, take it to a Nikon- authorized service representative for inspection. Failure to observe these precautions could result in fire or electric shock.
Page 13
Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. Handle moving parts with care Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts.
Page 14
3D Images Do not continuously view 3D images recorded with this device for extended periods, whether on a television, monitor, or other display. In the case of children whose visual systems are still maturing, consult a pediatrician or ophthalmologist prior to use and follow their instructions.
CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. xiii...
Page 16
Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Notice for customers in the State of California WARNING...
Page 17
Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Table of Contents Introduction ... ii Read This First ... ii Confirming the Package Contents... ii About This Manual ... iii Information and Precautions... v For Your Safety ... viii WARNINGS ... viii Notices... xiii Parts of the Camera ... 1 The Camera Body...
Page 19
Changing the Image Size (Image Mode)... 62 Image Mode Settings (Image Size and Quality) ... 62 Features That Cannot Be Used Simultaneously ... 64 Focusing... 65 Using Face Detection ... 65 Focus Lock... 66 Playback Features... 67 Playback Zoom ... 68 Thumbnail Display, Calendar Display...
Page 20
The Shooting Menu (for A (Auto) Mode)... E29 White Balance (Adjusting Hue) ... E29 Continuous Shooting ... E32 ISO Sensitivity ... E33 Color Options ... E34 The Playback Menu ... E35 a Print Order (Creating a DPOF Print Order)... E35 b Slide Show ...
Parts of the Camera This chapter describes the parts of the camera and explains information that is displayed in the monitor. The Camera Body...2 Attaching the Camera Strap and Lens Cap...4 Raising and Lowering the Flash ...5 The Monitor...6 Shooting Mode ...6 Playback Mode ...8 If you want to start using the camera right away, see “The Basics of Shooting and Playback”...
Built-in microphone (stereo) ... 80 Eyelet for camera strap...4 Flash ...5, 51 DC input connector (for AC adapter available separately from Nikon)... 12, E70 USB connector and audio/video output ...71 HDMI mini connector (Type C)...71 Connector cover...71 m (flash pop-up) button...5, 51 Side zoom control ...24...
Page 23
Monitor ... 6 A (shooting mode) button ...34, 35, 44, 48 Flash lamp... 52 b (e movie-record) button... 80 c (playback) button... 29 Eyelet for camera strap ... 4 Multi selector 10 9 13 14 k (apply selection) button Battery-chamber/ memory card slot cover...10, 13 l (delete) button...31 d button ...
Attaching the Camera Strap and Lens Cap Attach the lens cap to the camera strap, and then attach the strap to the camera. Attach them at two places. Lens Cap • Remove the lens cap before you take a picture. •...
Raising and Lowering the Flash Press the m (flash pop-up) button to raise the flash. • Using the Flash (Flash Modes) ➝ A 51 • Push the flash down gently to lower the flash until it clicks into place when not in use.
The Monitor • The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use. By default, information is displayed when the camera is turned on and when you operate the camera, and turns off after a few seconds (Monitor settings (A 88) >...
The Basics of Shooting and Playback Preparation Preparation 1 Insert the Batteries ...10 Preparation 2 Insert a Memory Card...13 Preparation 3 Set the Display Language, Date, and Time...16 Shooting Step 1 Turn the Camera On and Select Shooting Mode...20 Step 2 Frame a Picture ...23 Step 3 Focus and Shoot...26 Playback Step 4 Play Back Images ...29...
The Basics of Shooting and Playback Preparation 1 Insert the Batteries Open the battery-chamber/memory card slot cover. • Before opening the battery-chamber/memory card slot cover, hold the camera upside down to prevent the batteries from falling out. Insert the batteries. •...
Applicable Batteries • Four LR6/L40 (AA-size) alkaline batteries (batteries included) • Four FR6/L91 (AA-size) lithium batteries • Four EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries * EN-MH1 rechargeable Ni-MH batteries cannot be used. Removing the Batteries • Turn the camera off and be sure that the power-on lamp and the monitor have turned off before opening the battery-chamber/memory card slot cover.
Page 32
Notes About EN-MH2 Rechargeable Batteries When using EN-MH2 batteries with the COOLPIX L810, charge the batteries four at a time using Battery Charger MH-73 (A 89, E70). Alkaline Batteries Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a reliable brand.
Preparation 2 Insert a Memory Card Turn off the camera and open the battery- chamber/memory card slot cover. • When the camera turns off, the power-on lamp and the display turn off. • Before opening the battery-chamber/memory card slot cover, hold the camera upside down to prevent the batteries from falling out.
Formatting a Memory Card • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera. • All data stored on a memory card is permanently deleted when the card is formatted. Copy any data on the card that you wish to keep to a computer before formatting.
Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. • Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
Preparation 3 Set the Display Language, Date, and Time When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed. Press the power switch to turn on the camera. •...
Page 37
Press J or K to select your home time zone and press the k button. • Press H to enable daylight saving time. When the daylight saving time function is enabled, W is displayed at the top of the monitor. Press I to disable the daylight saving time function.
Page 38
Make sure that the lens cap has been removed, then press the A button. • The lens extends and the shooting-mode selection screen is displayed. When Easy auto mode is displayed, press the k button. • The camera enters the shooting mode and you can take pictures in Easy auto mode (A 20).
Page 39
Changing the Language Setting and the Date and Time Setting • You can change these settings using the Language (E60) and Time zone and date (E47) settings in the z setup menu (A 88). • You can enable and disable daylight saving time by selecting the z setup menu > Time zone and date (E47) >...
Step 1 Turn the Camera On and Select Shooting Mode Remove the lens cap and press the power switch to turn on the camera. • The lens extends and the monitor turns on. • Press the m (flash pop-up) button to raise the flash (A 5). Press the A button.
Page 41
Check the battery level indicator and the number of exposures remaining. Battery Level Indicator Display Battery level high. Battery level low. Prepare to replace the batteries. Battery Cannot take pictures. exhausted. Replace the batteries. Number of Exposures Remaining The number of pictures that can be taken is displayed. •...
Turning the Camera On and Off • Remove the lens cap and turn the camera on. • When the camera is turned on, the power-on lamp (green) will light and then the monitor will turn on (the power-on lamp turns off when the monitor turns on). •...
Step 2 Frame a Picture Hold the camera steady. • Keep fingers, hair, the camera strap, and other objects away from the lens, flash, AF assist-illuminator, and microphone. Frame the picture. • When the camera determines the scene mode, the shooting mode icon will change (A 34).
Easy Auto Mode • Depending upon shooting conditions, the camera may not select the desired scene mode. In this case, select another shooting mode (A 34, 35, 44, and 48). • When the digital zoom is in effect, the scene mode changes to U. When Using a Tripod •...
Digital Zoom When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control or the side zoom control toward g triggers digital zoom. Digital zoom can magnify the subject up to about 4× beyond the maximum magnification of the optical zoom.
Step 3 Focus and Shoot Press the shutter-release button halfway (A 27). • When a face is detected: The camera focuses on the face framed by the double border. When the subject is in focus, the double border glows green. •...
The Shutter-release Button To set focus and exposure (shutter speed and aperture value), press the shutter-release button halfway, stopping when you feel Press halfway resistance. Focus and exposure remain locked while the shutter- release button is pressed halfway. While pressing the shutter-release button halfway, press the shutter-release button the rest of the way down to release the shutter and take a picture.
Page 48
Autofocus The camera may not focus as expected in the following situations. In some rare cases, the subject may not be in focus despite the fact that the focus area or the focus indicator glows green: • Subject is very dark •...
Step 4 Play Back Images Press the c (playback) button. • The camera switches to playback mode and the last image saved is displayed in full-frame playback mode. Use the multi selector to select an image to display. • Display the previous image: H or J •...
Viewing Images • Images may be displayed briefly at low resolution while being read from the memory card or internal memory. • When you play back images in which the face of a person (A 65) or pet (A 42) was detected at the time of shooting, depending on the orientation of the detected face, the images are automatically rotated for playback display.
Step 5 Delete Images Press the l button to delete the image currently displayed in the monitor. Press the multi selector H or I to select the desired deletion method and press the k button. • Current image: Only the current image is deleted. •...
Page 52
Operating the Erase Selected Images Screen Press the multi selector J or K to select an image to be deleted, and then press H to display y. • To undo the selection, press I to remove y. • Rotate the zoom control (A 2) to g (i) to switch back to full-frame playback or f (h) to display thumbnails.
Shooting Features This chapter describes the camera’s shooting modes and the features that are available when using each shooting mode. You can select shooting modes and adjust settings according to the shooting conditions and the kind of images you want to capture. G (Easy Auto) Mode...
Shooting Features G (Easy Auto) Mode The camera automatically selects the optimum scene mode when you frame a picture. Enter shooting mode M A (shooting mode) button M G (easy auto) mode M k button Automatic Scene Selection The camera automatically selects one of the following scenes when you point the camera at a subject: •...
Scene Mode (Shooting Suited to Scenes) When one of the following scenes is selected, camera settings are automatically optimized for the selected scene. Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M K M H, I, J, K M select a scene M k button * The icon of the last scene selected is displayed.
Changing Scene Mode Settings • Depending on the scene, the multi selector H (X), I (p), J (n), and K (o) can be used to set the corresponding features. ➝ “Features That Can Be Set Using the Multi Selector” (A 50), “Default Settings” (A 60) •...
d Sports Use this mode when shooting sporting events. The camera captures a series of still images that allow you to clearly see detailed movements in a moving subject. • The camera focuses on the area in the center of the frame. •...
Page 58
Z Beach Captures the brightness of such subjects as beaches or sunlit expanses of water. • The camera focuses on the area in the center of the frame. z Snow Captures the brightness of sunlit snow. • The camera focuses on the area in the center of the frame. h Sunset Preserves the deep hues seen in sunsets and sunrises.
Page 59
j Night landscape Slow shutter speeds are used to capture stunning night landscapes. • The focus area or focus indicator (A 7) always glows green when the shutter-release button is pressed halfway. k Close-up Use this mode to photograph flowers, insects, and other small objects at close range.
Page 60
l Museum Use indoors where flash photography is prohibited (for example, in museums and art galleries) or in other settings in which you do not want to use the flash. • The camera focuses on the area in the center of the frame. •...
Page 61
U Panorama assist Use this setting to capture a series of images that will be connected using a computer to form a panorama image (E2). • Press the multi selector H, I, J, or K to select the direction that you will move the camera in when capturing images, and press the k button.
Page 62
O Pet portrait Use this mode when taking pictures of dogs or cats. When the camera detects the face of a dog or cat, the camera focuses on that face. Once the camera has focused, by default it automatically releases the shutter (pet portrait auto release). •...
Page 63
s 3D photography Use this mode for taking 3D images viewable in three dimensions on a 3D-compatible TV or monitor. The camera takes one picture for each eye to simulate a three-dimensional image. Images taken in this mode are saved at an image size of n (1920 × 1080). •...
Smart Portrait Mode (Capturing Smiling Faces) When the camera detects a smiling face, you can take a picture automatically without pressing the shutter-release button (smile timer). You can use the skin softening option to smooth the skin tones in human faces. Enter shooting mode M A (shooting mode) button M F Smart portrait mode M k button Frame the picture.
Notes About Smart Portrait Mode • Digital zoom cannot be used. • Under some shooting conditions, the camera may be unable to detect faces or detect smiles. • “Notes About Face Detection” ➝ A 65 Auto Off in Smile Timer Mode When Smile timer is set to On, the auto off function (A 88) is activated and the camera turns off when either of the situations indicated below persists and no other operations are performed.
Options Available in the Smart Portrait Menu When using F smart portrait mode, the following settings can be changed. Enter smart portrait mode (A 44) M d button M F tab Option Allows you to select the combination of image size and image quality Image mode used when saving images (A 62).
Using Skin Softening When the shutter is released in one of the following shooting modes, the camera detects one or more human faces (up to three), and processes the image to soften facial skin tones. • Portrait (A 36) or Night portrait (A 37) in G (easy auto) mode •...
A (Auto) Mode Used for general shooting. Settings can be adjusted in the shooting menu (A 49) to suit the shooting conditions and the type of shot you want to capture. Enter shooting mode M A (shooting mode) button M A (auto) mode M k button •...
Options Available in the Auto Shooting Menu When using A (auto) mode, the following settings can be changed. Enter A (auto) mode (A 48) M d button M A tab Option Allows you to select the combination of image size and image Image mode quality used when saving images (A 62).
Features That Can Be Set Using the Multi Selector When shooting, the multi selector H, I, J, and K can be used to set the following features. n (self-timer), pet portrait auto release Available Features The features that are available vary with the shooting mode, as shown below. •...
Using the Flash (Flash Modes) In dark locations or when the subject is backlit, you can take pictures with flash by raising the flash. You can set the flash mode. Press the m (flash pop-up) button. • The flash pops up. •...
Page 72
Press the multi selector H or I to select the desired mode and press the k button. • Available Flash Modes ➝ A 53 • If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled. •...
Available Flash Modes Auto The flash fires automatically when lighting is dim. Auto with red-eye reduction Reduce red-eye in portraits caused by the flash (A 54). The flash will not fire. • We recommend using a tripod to stabilize the camera when shooting in dark surroundings.
Page 74
The Flash Mode Setting • The setting varies with the shooting mode. ➝ “Available Features” (A 50) ➝ “Default Settings” (A 60) • Some settings cannot be used with other functions (A 64). • The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the camera is turned off.
Using the Self-timer The camera’s self-timer can release the shutter about ten seconds after you press the shutter- release button. The self-timer is useful when you want to be in the picture you are taking, or when you want to avoid the effects of camera shake that occur when you press the shutter-release button. When using the self-timer, use of a tripod is recommended.
Page 76
Press the shutter-release button the rest of the way down. • The self-timer starts, and the number of seconds remaining before the shutter is released is displayed in the monitor. The self-timer lamp flashes while the timer is counting down. About one second before the shutter is released, the lamp stops flashing and glows steadily.
Using Macro Mode When using macro mode, the camera can focus on objects as close as about 1 cm (0.4 in.) from the lens. This feature is useful when taking close-up pictures of flowers and other small subjects. Press the multi selector I (p macro mode). Press the multi selector H or I to select ON and press the k button.
Page 78
Notes About Using the Flash The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.). Autofocus When shooting still images in macro mode, the camera focuses continuously until the shutter- release button is pressed halfway to lock the focus.
Adjusting Brightness (Exposure Compensation) You can adjust overall image brightness. Press the multi selector K (o exposure compensation). Press the multi selector H or I to select a compensation value. • To make the image brighter, apply positive (+) exposure compensation.
Default Settings Default settings for each shooting mode are described below. G (easy auto) (A 34) F (smart portrait) (A 44) U A (auto) (A 48) Scene b (A 36) c (A 36) d (A 37) e (A 37) f (A 37) Z (A 38) z (A 38) h (A 38)
Page 81
O (A 42) s (A 43) Setting is used when the flash is raised. You can select U (auto) or W (off). When U (auto) is selected, the camera automatically selects the flash mode appropriate for the scene it has selected. The setting cannot be changed.
Changing the Image Size (Image Mode) Enter shooting mode M d button M Shooting menu M Image mode M k button You can use the Image mode setting in the shooting menu to select the combination of image size and compression ratio that is used when saving images. Select the image mode best suited to the manner in which images will be used and the capacity of the internal memory or memory card.
Page 83
Number of Images That Can Be Saved The following table lists the approximate number of images that can be saved in the internal memory and on a 4 GB memory card. Note that due to JPEG compression, the number of images that can be saved varies greatly depending on the composition of the image.
Features That Cannot Be Used Simultaneously Some shooting settings cannot be used with other functions. Restricted function Continuous (A 49) Flash mode Blink proof (A 46) Self-timer Smile timer (A 46) Digital zoom Continuous (A 49) Image mode Continuous (A 49) Color options White balance (A 49)
Focusing Using Face Detection In the following shooting modes, the camera uses face detection to automatically focus on human faces. If the camera detects more than one face, a double border is displayed around the face that the camera will focus on, and single borders are displayed around the other faces.
Focus Lock When the camera focuses on an object in the center of the frame, you can use focus lock to focus on an off-center subject. Use the following procedure when taking pictures using A (auto) mode. Aim the camera so that the subject is in the center of the frame. Press the shutter-release button halfway.
Playback Features This chapter describes the features that are available when playing back images. 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 0 0 0 4 .
Playback Features Playback Zoom Rotating the zoom control to g (i) in full-frame playback mode (A 29) zooms in on the center of the image displayed in the monitor. 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 1 5 / 0 5 / 2 0 1 2 1 5 : 3 0 0 0 0 4 .
Features Available in Playback Mode (Playback Menu) When viewing images in full-frame playback mode or thumbnail playback mode, you can configure the following functions by pressing the d button (A 3) to display the menu. Option Allows you to create copies with enhanced brightness and 1, 2 I D-Lighting contrast, brightening dark portions of an image.
Connecting the Camera to a TV, Computer, or Printer You can enhance your enjoyment of images and movies by connecting the camera to a TV, computer, or printer. • Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off.
Page 92
Viewing images on a TV You can view the camera’s images and movies on a TV. Connection method: Connect the video and audio plugs of the included Audio Video Cable EG-CP16 to the TV’s input jacks. Alternatively, connect a commercially available HDMI cable (Type C) to the TV’s HDMI input jack. Viewing and organizing images on a computer If you transfer images to a computer, you can perform simple retouching and manage image data in addition to playing back images and movies.
Using ViewNX 2 ViewNX 2 is an all-in-one software package which enables you to transfer, view, edit and share images. Install ViewNX 2 using the ViewNX 2 Installer CD-ROM. ViewNX 2™ Your Imaging Toolbox Installing ViewNX 2 • An Internet connection is required. Compatible Operating Systems Windows •...
Page 94
Mac OS • Mac OS X (version 10.5.8, 10.6.8, 10.7.2) Refer to the Nikon website for the latest information on operating system compatibility. Start the computer and insert the ViewNX 2 Installer CD-ROM into the CD-ROM drive. • Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon.
Page 95
The following software is installed: • ViewNX 2 (consisting of the three modules below) - Nikon Transfer 2: For transferring images to the computer - ViewNX 2: For viewing, editing, and printing transferred images - Nikon Movie Editor: For basic editing of transferred movies •...
Nikon Transfer 2 and click OK. 2 Double-click Import File. If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts. Connecting the USB Cable...
Transfer images to the computer. • Confirm that the name of the connected camera or removable disk is displayed as the “Source” on the “Options” title bar of Nikon Transfer 2 (1). • Click Start Transfer (2). • At default settings, all the images on the memory card will be copied to the computer.
Viewing Images Start ViewNX 2. • Images are displayed in ViewNX 2 when transfer is complete. • Consult online help for more information on using ViewNX 2. Starting ViewNX 2 Manually • Windows: Double-click the ViewNX 2 shortcut icon on the desktop. •...
Recording and Playing Back Movies You can record movies by simply pressing the b (e movie-record) button. 2 9 m 0 s 2 9 m 0 s 9 7 0 9 7 0 Recording Movies ... 80 Changing Movie Recording Settings (the Movie Menu)... 83 Playing Back Movies...
Recording and Playing Back Movies Recording Movies You can record movies by simply pressing the b (e movie-record) button. Display the shooting screen. • The icon for the selected movie option is displayed. The default setting is n HD 720p (1280×720) (A 83). Lower the flash (A 5) •...
Page 101
Press the b (e movie-record) button again to end recording. Notes About Saving Data After taking pictures or recording a movie, the number of exposures remaining or the remaining recording time flashes while images or movies are being saved. Do not open the battery- chamber/memory card slot cover while images or movies are being saved.
Page 102
Movie Options and Maximum Movie Length Movie options (A 83) n HD 720p (1280×720) (default setting) m VGA (640×480) All figures are approximate. The maximum movie length may vary depending on the make of the memory card, even among memory cards of the same capacity. * The maximum size for a single movie is 4 GB, and the maximum movie length for a single movie is 29 minutes, even when there is sufficient free space on the memory card.
Changing Movie Recording Settings (the Movie Menu) Enter shooting mode M d button M D tab M k button The following settings can be changed. Option The following movie types are available: n HD 720p Movie options (1280×720) and m VGA (640×480). When A Single AF (default setting) is selected, focus is locked when movie recording begins.
Playing Back Movies Press the c button to enter playback mode. Movies are indicated by the movie options icon (A 83). Press the k button to play back movies. Deleting Movies To delete a movie, select the desired movie in full-frame playback mode (A 29) or thumbnail playback mode (A 69) and press the l button (A 31).
Page 105
Adjusting Volume Rotate the zoom control to g or f (A 2) during playback. Notes About Playing Back Movies The COOLPIX L810 is not able to play back movies recorded with another make or model of digital camera. Description Volume indicator...
General Camera Setup This chapter describes the various settings that can be adjusted in the z setup menu. 2 9 m 0 s 2 9 m 0 s 9 7 0 9 7 0 For further details about each setting, refer to “The Setup Menu” in the Reference Section (E46).
General Camera Setup The Setup Menu Press the d button M z (setup) tab M k button The following settings can be changed in the setup menu by selecting the z tab. Option Allows you to select whether or not a welcome screen is Welcome screen displayed when the camera is turned on.
Option Format memory/ Allows you to format the internal memory or the memory card. Format card Language Allows you to change the camera’s display language. TV settings Allows you to adjust TV-connection settings. Allows you to set whether or not closed eyes are detected when Blink warning taking pictures of people using face detection.
Technical Notes and Index Caring for the Product...F2 The Camera...F2 Batteries ...F4 Memory Cards ...F6 Cleaning and Storage...F7 Cleaning...F7 Storage ...F7 Troubleshooting...F8 Specifications...F16 Supported Standards... F20 Index ...F21...
Technical Notes and Index Caring for the Product The Camera To ensure safe and continued enjoyment of your Nikon camera, observe the following precautions and the precautions noted in “For Your Safety” (A viii-xv) when using or storing your camera.
Page 113
• Images in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon-authorized service representative. Notes About Smear White or colored streaks may be visible when bright subjects are framed in the monitor. This phenomenon, known as “smear,”...
• Do not mix batteries with different amounts of charge remaining, or batteries of a different make or model. • When using EN-MH2 batteries with the COOLPIX L810, charge the batteries four at a time using Battery Charger MH-73. Use only Battery Charger MH-73 to charge EN-MH2 batteries.
Page 115
Notes About Rechargeable Ni-MH Batteries • If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge remaining, the message Battery exhausted. may be displayed prematurely when using the batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold decreases temporarily.
Memory Cards • Use only Secure Digital memory cards. Approved memory cards ➝ A 15 • Observe the precautions noted in the documentation included with your memory card. • Do not affix labels or stickers to the memory card. • Do not format the memory card using a computer. •...
Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. When cleaning the lens, avoid touching it directly with your fingers. Remove dust or lint with a blower. To remove fingerprints, oil, or other grime that cannot be removed with a blower, wipe the lens with a soft, dry cloth or an eyeglass cleaning cloth, using Lens a gentle spiral motion that starts in the center and moves toward the edges.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Camera turns off without warning. Monitor is blank. Monitor is hard to read.
Page 119
Problem • If camera clock has not been set, “Date not set” Date and time of recording are not correct. • Check camera clock regularly against more No indicators displayed in Hide info is selected for Photo info. monitor. Select Show info. Print date not available.
Page 120
Turn the camera off, remove and replace the batteries, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not saved to internal memory or the memory card at the time the problem occurred.
Page 121
Problem • Subject is too close. Try shooting using easy auto • The intended subject is one with which autofocus Camera cannot focus. • Set AF assist in the setup menu to Auto. • Turn camera off and then on again. •...
Page 122
Problem Digital zoom cannot be used. Image mode not available. No sound when shutter is released. AF-assist illuminator does not light. Images appear smeared. Colors are unnatural. Randomly spaced bright pixels (“noise”) appear in image. Cause/Solution • Digital zoom cannot be used in the following situations.
Page 123
Problem • The flash is lowered or the flash mode is set to W (off). • Flash window is blocked. • Subject is beyond flash range. Images are too dark • Adjust exposure compensation. (underexposed). • Increase ISO sensitivity. • Subject is backlit. Select Backlighting scene mode, or Images are too bright Adjust exposure compensation.
Page 124
• File or folder was overwritten or renamed by computer or other make of camera. • The COOLPIX L810 is not able to play back movies recorded with another make or model of digital camera. • Playback zoom cannot be used with movies, small pictures, or images that have been cropped to a size of 320 ×...
Page 125
• Confirm system requirements. connected. • Computer is not set to start Nikon Transfer 2 • Memory card contains no images. Replace the Images to be printed are not • Remove the memory card to print images from the displayed.
Specifications Nikon COOLPIX L810 Digital Camera Type Effective pixels Image sensor Lens Focal length f/-number Construction Digital zoom Vibration reduction Autofocus (AF) Focus range (from lens) Focus-area selection Monitor Frame coverage (shooting mode) Frame coverage (playback mode) Compact digital camera 16.1 million...
Page 127
Storage Media Internal memory (approx. 50 MB), SD/SDHC/SDXC memory card File system DCF, Exif 2.3, DPOF, and MPF compliant Still pictures: JPEG File formats 3D images: MPO Movies: MOV (Video: H.264/MPEG-4 AVC, Audio: LPCM stereo) • 16M (High) [4608 × 3456P] •...
Page 128
Built-in flash Range (ISO sensitivity: Auto) Flash control Interface Data transfer protocol Video output HDMI output I/O terminal Supported languages Power sources Battery life Tripod socket Dimensions (W × H × D) Weight [W]: Approx. 0.5 to 5.0 m (1 ft 8 in. to 16 ft) [T]: Approx.
Page 129
FR6/L91 (AA-size) Energizer(R) Ultimate Lithium batteries. The included batteries are for trial use only. Specifications • Nikon will not be held liable for any errors this manual may contain. • The appearance of this product and its specifications are subject to change without notice.
Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry-wide standard that allows images to be printed from print orders saved on memory cards.
Index Refer to the Reference Manual CD for pages indicated with E. Symbols R ... E3 g (Tele) ... 24 f (Wide) ... 24 i Playback zoom ... 68 h Image thumbnail display ... 69 G Easy auto mode... 34 b Scene mode...
Time difference ... E50 Time zone ... 17, E47, E50 Time zone and date... 16, 88, E47 Tripod socket ... 3, F18 TV ... 72, E17 TV settings ... 89, E61 USB cable ... 71, 76, E21, E70 USB connector and audio/video output ...
Page 136
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Printed in Hong Kong CT2A01(11) 6MM25811-01 2012...
Need help?
Do you have a question about the COOLPIX L810 and is the answer not in the manual?
Questions and answers