Digital Audio (Digital Audio Input); Sp Config (Speaker Configuration) - Onkyo HT-R758 Instruction Manual

3 _4 +4 5
+2@ + "Setup"+
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign "OPTICALI" to the "TV/CD" input selector.
Here are the default assignments.
BD/DVD
CBL/SAT
GAME
PC
AUX
TV/CD
COAXIALI
COAXIAL2
OPTICALI
OPTICAL2
m BD/DVD, CBI_/SAT, GAME, PC, AUX, TV/CD
COAXIAL1, COAXIAL2, OPTICAL1,
OPTICAL2:
Select the input to which the component has been
connected.
} ..... :
Select if the component is connected to an analog
audio input.
• When all HDMI IN is assigned to all input selector ill
"ItDMI Input" (3 page 45), the same HDMI IN will be set as
a priority in this assignment. In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection ill
the "Audio Selector" (3 page 50).
• Supported sampling rates for PCM signals (stereo/mono) froru a
digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/l 6,
20, 24 bit.
"Setup"+ _
Some of the settings in this section are set automatically
by Audyssey 2EQ® Room Correction and Speaker Setup
J
(_ page 30).
Here you can check the settings made by Audyssey 2EQ
Room Correction and Speaker Setup function, or set them
manually, which is useful if you change one of the
connected speakers alter using Audyssey 2EQ Room
Correction and Speaker Setup function.
This section explains how to specify which speakers are
connected and their sizes.
Cone diameter
For speakers with a cone diameter larger than 6-112 inches
(16 cm), specify Large (lull band). For those with a
smaller diameter, specify Small (default crossover 100Hz).
The crossover frequency can be changed in "Crossover
(Crossover Frequency)".
• These settings are not available in either of the following cases:
- A pair of headphones is connected.
- The "Audio TV Out" setting is set to "On" (3 page 52).
- "HDMI Ctrl (RIHD)" is set to "On" (3 page 52) and you're
listening through your TV speakers.
N Subwoofer
Yes
No
Advanced Operations
N Front
} Small:
Large:
Select based on the cone diameter.
• If the "Subwoofer" setting is set to "No", this setting is fixed to
"Large".
N Center_, Surrounffl
Small:
Large:
Select based on the cone diameter.
None
"1 If the "Front" setting is set to "Small", the "Large" option
cannot be selected.
N Crossover (Crossover Frequency)
This setting is advantageous for the speakers that you
specified as "Small" in "Sp Config (Speaker
Configuration)". To get the best bass performance from
your speaker system, you need to set the crossover
frequency according to the size and frequency response
of your speakers.
40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,
120Hz, 150Hz, 200Hz
Use the diameter of the smallest speaker in your system
when choosing the crossover frequency.
Over 8 in. (20 cm)
6-112 to 8 in. (16 to 20 cm)
5-1/4 to 6-1/2 in. (13 to 16 cm)
3-1/2 to 5-1/4 in. (9 to 13 cm)
Under 3-1/2 in. (9 cm)
40150160 Hz*
70180190 Hz*
100 Hz
120 Hz
1501200 Hz*
* Choose the setting matching your speaker.
L_ To be continued
En-46
©©