Panasonic Lumix DMC-GH2K Operating Instructions Manual page 194

Recording
[REC] Mode: _
X
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
Set the mode dial to [_].
_ otate the rear dial to set the aperture
value.
• It will switch between aperture setting operation and
Exposure Compensation operation every time the
rear dial is pressed.
• Rotate the rear dial to display the [EXPO.METER].
(P132)
V
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
_Set the mode dial to [_].
Rotate the rear dial to set the shutter
speed.
• It will switch between shutter speed setting operation
and Exposure Compensation operation every time
the rear dial is pressed.
• Rotate the rear dial to display the [EXPOMETER].
(P132)
• It will be a normal motion picture recording when recording a motion picture.
• How the Exposure Compensation is switched can be changed by [EXPO. SETTINGS] (P132)
in the [CUSTOM] menu.
• In the Quick Menu (P56) while in touch operation, setting of the aperture value or shutter speed
can be set by touching the aperture value or shutter speed, and then touching the exposure
meter bar.
• The brightness of the LCD monitoriViewfinder and the recorded pictures may differ. Check the
pictures on the playback screen.
• Set the aperture value to a higher number when the subject is too bright in Aperture-Priority AE
Mode. Set the aperture value to a lower number when the subject is too dim.
• When you use a lens with an aperture ring, the setting for the rear dial becomes effective if you
rotate the aperture ring to the [A] position and the aperture ring setting takes priority if you
rotate the aperture ring to a position other than [A] in Aperture-Priority AE Mode.
92 VQT3A36