Panasonic Lumix DMC-GH2K Operating Instructions Manual page 181

Recording
• Changing the settings for [E]/_SETTINGS], [STEP] and [SEQUENCE] in Auto
Bracket
| Select [AUTO BRACKET] in the [REC] Mode menu. (P55)
2 Press A/T to select [F-]/[_JSETTINGS], [STEP] or
[SEQUENCE] and then press I_.
3
4
Press A/T to select the setting and then press [MENU/SET].
Item. Settings
[F-q] (single)
[F-']/[_ SETTINGS] [SEQUENCE]
[ EC]_j] ( burst)
[3ol/3] (3 pictures)
[3o2/3] (3 pictures)
[3ol] (3 pictures)
[5ol/3] (5 pictures)
[STEP] [5o2/3] (5 pictures)
[5ol] (5 pictures)
[7ol/3] (7 pictures)
[7o2/3] (7 pictures)
[7ol] (7 pictures)
You can take one picture at a time when set to [F-l].
You can continuously take pictures up to set numbers when set to [[_].
Press [MENU/SET] twice to close the menu.
Item Settings
[0/ /+]
[ /0/+]
• When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
• The exposure may be compensated incorrectly, depending on the brightness of the subject.
• In this mode the Auto Review mode is activated, regardless of the user settings.
• When the flash is activated, you can take only 1 picture.
• Auto Bracket is disabled when Multi Film Bracket, White Balance Bracket, or Aspect Bracket is
set.
• The Auto Bracket will be disabled during recording of the motion pictures.
VQT3A36
79