Panasonic Lumix DMC-GH2K Operating Instructions Manual page 164

Basic
Adjust the position of the touch panel if a different thing gets selected
from what you touched or touch operation does not respond.
1
2
' '3
Press [MENU/SET].
Touch the orange [+] mark displayed
on the screen in order with the stylus
pen (supplied) (5 places).
• A message is displayed once the
position is set.
Press [MENU/SET] to finish.
i//
• To accurately calibrate the LCD Monitor, be sure to touch precisely at the designated locations.
]Set the language displayed on the screen.
_:[LANGUAGE ] __p_-'-_O L_ RTU G U le S]
• If you set a different language by mistake, select [01] from the menu icons to set the desired
language.
] _rt4_[VERSION DISP.] ] This enables the firmware versions of the camera and lens to be checked. ]
• [-. -] is displayed as the lens firmware when the lens is not mounted.
I m_l_[NO:RESET] ]Reset the file number of the next recording to 0001. ]
• The folder number is updated and the file number starts from 0001. (P 165)
• A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. We recommend formatting the card
(P62) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
f_,, r#l=_l=-n The [REC] or [SETUP]![CUSTOM] menu settings are reset to the
n L,-'---'-,J initial settings.
• When the [REC] Mode settings are reset, data registered with [FACE RECOG.] will also be reset.
• When [SETUP]/[CUSTOM] menu settings are reset, the following settings are also reset. In
addition, [ROTATE DISR] (P148) in [PLAYBACK] Mode menu is set to [ON].
-The birthday and name settings for [BABYI]/[BABY2] (P100) and [PET] (P 101 ) in Scene Mode.
-The settings of [TRAVEL DATE] (Pl14) (departure date, return date, location)
-The [WORLD TIME] (Pl15) setting.
• The folder number and the clock setting are not changed.
I IThe card is f°rmatted.
r_A,. :.,.. I Formatting permanently deletes all data on your memory
t_42IJ-UKMAI 1 card. Please be sure all pictures and motion pictures are
saved e sewhere before us ng th s feature.
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC8PP; optional) and DC
coupler (DMW-DCC8; optional) when formatting. Do not turn the camera off during formatting.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• If the card cannot be formatted,please try another card before contactingyour nearestService Center.
62 VQT3A36