Panasonic Lumix DMC-GH2K Operating Instructions Manual page 131

Preparation
The following cards which conform to the SD video standard can be used with this unit.
These cards are indicated as card in the text.)
ii i i_, _ i i i i _ _ i _ _i _i_h_i_i _ h_ __ii_ _ _ ,,,_ _.........................................................................................
SD Memory Card • SDHC Memory Card can be used with SDHC Memory Card
(8 MB to 2 GB) or SDXC Memory Card compatible equipment.
SDHC Memory Card • SDXC Memory Card can only be used with SDXC Memory
(4 GB to 32 GB)Card compatible equipment.
• Check that the PC and other equipment are compatible when
SDXC Memory Card using the SDXC Memory Cards.
(48 GB, 64GB)htto:llDanasonic.netlavclsdcardlinformationlSDXC.html
• Only cards bearing the SDHC logo (indicating that the card conforms to SD video standards)
may be used as 4 GB to 32 GB cards.
• Only cards bearing the SDXC logo (indicating that the card conforms to SD video standards)
may be used as 48 GB and 64 GB cards.
• Use a card with SD Speed Class _ with "Class 4" or higher when recording motion pictures in
[AVCHD]. Also, use a card with SD Speed Class with "Class 6" or higher when recording
motion pictures in [MOTION JPEG].
SD Speed Class is the speed standard regarding continuous writing. Check via the label on the card, etc.
e.g.:
CLASS_ CLASS_
• Please confirm the latest information on the following website.
http:llpanasonic.iplsupportlqloballcsldscl
(This Site is English only.)
Access to the card
The access indication lights red when pictures are being recorded
on the card.
• Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(DMW-AC8PP; optional) when the access indication is lit [when pictures are being
written, read or deleted, or the card is being formatted (P62)]. Furthermore, do not subject
the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer operate
normally.
If operation fails due to vibration, impact or static electricity, perform the operation again.
• Write-Protect switch @ provided (When this switch is set to the [LOCK] position,
no further data writing, deletion or formatting is possible. The ability to write, delete
and format data is restored when the switch is returned to its original position.)
• The data on the card may be damaged or lost due to electromagnetic waves, static
electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
• Do not format the card on your PC or other equipment. Format it on the camera only to ensure
proper operation. (P62)
• Keep the Memory Card out of reach of children to prevent swallowing.
VQT3A36
29