Panasonic KX-F900 Service Manual page 94

i
KX-F900
4-4. SERVICE FUNCTION TABLE
Code Function
501 Setting of pause time
502 Setting of flash time
503 Setting of pulse dial speed
520 Setting of CED frequency
521
522
Setting of international line mode
Setting of return to default mode
523 Setting of reception equalizer
Selection of document
544 feed position
550 Memory clear
551 ROM version and sum check
Set Value
001~600X100msec
01~99X10msec
1 : 10 pps
2 : 20 pps
1 : 2100 Hz
2 : 1100 Hz
1 :ON
2 " OFF
1 :ON
2 : OFF
1 :ON
2 : OFF
01 _99 step
EffectiveRange
001_600
01 _99
1,2
1,2
1,2
01 _99
Default
05000msec
700 msec
10 pps
2100 Hz
ON
ON
OFF
Remarks
Selects the pause time in 100
msec step.
Selects the line break time during
flashing in 10 msec step.
Sets the pulse dial speed.
When international communica-
tions cannot be performed
smoothly, select 1100 Hz.
Selects the international line mode
during of FAX communication.
Sets the resolution and contrast
conditions of FAX or copy return-
ing to the default.
When a station is quite a dis-
tance from the unit or reception
cannot be performed correctly,
set to "ON".
When ADF function is improper,
adjust feed position. (8 step=lmm)
Press "STA RT/COPY/S ET".
Press "START/COPY/SET".
1 " OFF To monitor the line signal with
553 Setting of FAX monitor function 2 : PHASE B 1,2, 3 OFF the unit's speaker during FAX
3 : ALL communication or not.
554 Modem test "START" press.
555 Scanner test "START" press.
556 Motor test "START" press.
557 LED test "START" press.
558 LCD test "START" press.
Selects the jam detection of
559 Setting of document jam 1 • ON 1,2 ON document during FAX
detection transmission/copying.
560 Cutter select 1,2 ON
561 KEY test Press any key.
562 Cutter test "START" press.
563 CCD position adjustment 00_30X 1 mm 00_30 _ Lets you select the correction
value set value for main scanning direc-
tion of the dislocated scanner.
1 : 61% Sets the % break of the pulse
570 Setting of the % break 2 : 67% 1 2 61%
' dial.
2 - OFF
1 ON
2 : OFF
-94-