Panasonic KX-F900 Service Manual page 95

571
Function
Setting of number of times
that ITS is redialed
572 Setting of ITS redial interval
573 TEL ring count
590 Setting of number of times of
FAX redial
Setting of FAX redial interval
591
r ....... 1
592
Set Value
593
00_99
001_999 sec
01 _99
0_99
001_999 sec
1 : OFF
Designation of CNG sending 2 : ALL
3 : AUTO
Setting of interval between
CED and 300 bps signal.
594 Setting of overseas
DIS detection
Setting of the acceptable
value of reception error
595
596 Setting of transmit level
1 : 75 msec
2 : 500 msec
3 : 1000 msec
700 EXT TAM OGM time
701 Silence detect time
702 EXT TAM ring count
717 Transmit speed select
718 Receive speed select
1 : Detects at the
1st time
2 : Detects at the
2nd time
001_999Xnumber oftimes
-15_00
x second
x 100 ms
x number of rings
1 : 9600 BPS
2 : 7200 BPS
3 : 4800 BPS
4 : 2400 BPS
1 : 9600 BPS
2 : 7200 BPS
3 : 4800 BPS
4 : 2400 BPS
EffectiveRange
00_99
001_999
01 _99
00_99
001_999
1,2,3
1,2,3
1,2
001_999
-15_00
01 _99
01 _99
0_9
1_4
1_4
14 times
030 sec
15 times
5 times
045 sec
ALL
75 msec
Detects
at the
1st
time
100
-10 dBm
10 sec
5O ms
5 times
9600 BPS
9600 BPS
Remarks
Selects the number of times that
ITS is redialed (not including the
first dialing).
Sets the interval of ITS redial.
Sets the' number
of rings that
unit starts to receive a docu-
ment in TEL mode.
Selects the number of times of re-
dial during FAX communication (not
including the first dialing).
Sets the interval of FAX redial
during FAX communication.
Lets you select the CNG output
during FAX transmission.
ALL: CNG is output at phase A.
AUTO: CNG is output only when
the automatic dialing is per-
formed.
OFF: CNG is not output at phase
A.
Sets the interval between the
CED signal and subsequent
300 bps signal.
Sets the recognizing format of DIS
signal.
1: Detects the first DIS signal sent
from the receiver during FAX
transmission.
2: Ignores the first DIS signal sent
from the receiver during FAX
transmission.
Sets the number of error ac-
ceptable lines when the FAX re-
constructs the received data.
Selects the FAX transmission
level.
(Increase the level when the
telephone line condition is poor.)
Sets the start time of silence de-
tect.
Sets the silence of call confir-
mation times.
Sets the number of rings that
unit start to receive a document
in EXT-TAM mode.
Adjusts the speed to start train-
ing during FAX transmission.
Adjusts the speed to start train-
ing during FAX reception.
-95-