Programming And Lists; Programming And Lists - Panasonic KX-F900 Service Manual

KX-F900 -- j
4. PROGRAMMING AND LISTS
The programming functions are used to program the various features and functions of the machine, and to test the
machine. Programming can be done in both the on-hook and off-hook conditions. This facilitates communication
between the user and the service while programming the machine.
4-1. OPERATION
There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is
further broken down into the normal and the special programs. The normal programs are those listed in the
Operating instructions and available to the user. The special programs are those listed only here and not displayed
to the user. In both User and Service Mode, there are Set Functions and Test Functions. The Set Functions are
used to program various features and functions, and the Test Functions are used to test various functions.
The Set Functions are accessed by entering their code, changing the appropriate value, then pressing the SET key.
The test Functions are accessed by entering their code and pressing the key listed on the menu. While programming,
to cancel any entry, press the STOP key.
4-2. OPERATION FLOW
User mode _ (1) TEST mode _ PRINT mode (prints out the list to confirm
I Programming I I (user programmable)%_(2) SET mode __ the set values)
[.Service mode _ Normal (3) SET mode _ PRINT mode (prints out the
(not user programmable) Special _ (4) SET mode list to confirm the set values)
(5) TEST mode
Operating Procedure
MENU button ]
LCD
I SYSTEM SET UP
I
Iser mode
_'z-
I
_-- LCD
I SETUP
ITEM[ ] I
Follow the instructions on the LCD.
_ Code
I-_ D [[] XXXXXXX
(Some codes are for the Test Functions, while others are for the Set Functions.)
LCD
User mode #MENU buttonI--'-I MENU
button ---- I
PRINT
LIST ---- I
START/COPY/SET b utton
I----I','button I
Printout i START/COPY/SET b utt0nI_LCDsIc LIST/ ADVANCED LIST j_ I
Code Follow the instructions on the LCD.
Service m°del--_ 1-9] I_-I F] r-6-ii--_--i -T--_ D D D xxxxxxx
l/ (some are for the Test Functions some for the special
codes
I / Set Functions, while others are for the Set Functions.)
/ /
LCD _ ISetvalue = __
I H--,'51- • l Pr nt out
-92-