Panasonic KX-F900 Service Manual page 147

I KX-F900
(4) Concerning Transmission of Time
[Transmission T,mel= I Contro, T,mo I+ I +
Transmission time consists of the following.
Control time : This is time at the start of transmission when functions at the sending and receiving sides are
confirmed, transmission mode is established, and transmission and reception are
synchronized.
Image transmission time:
This is the time required for transmission of document contents (image data). In general, this
time is recorded in the catalog, etc.
Hold time: This is the time required after the document contents have been sent to confirm that the
document was in fact sent, and to check for telephone reservations and/or the existence of
continuous transmission.
(5) Facsimile Standard
Item _
Connection Control Mode
Terminal Control Mode
Facsimile Signal Format
Modulation Mode
Transmission Speed
Redundancy Compression
Process 2 dimension : MR Mode (K=2.4)
(Coding Mode)
Main Scan : 8 pel/mm
Resolution
Sub Scan : 3.85, 7.71/mm
Line Synchronization Signal EOL Signal
1 Line Transmission Time Depends on degree of data reduction.
[ms/line] Minimum Value : 10, 20
Can be recognized in 40ms.
Telephone Network Facimile
G3 Machine
Telephone Network Signal Mode
T. 30 Binary
Digital
PSK (V. 27 ter) or QAM (V. 29)
300 bps (control Signal)
2400, 4800, 7200, 9600 bps (FAX Signal)
1 dimension : MH Mode
O
O
-I
O
"o
m
30
),
-I
O
z
147