Weed Eater WELRVBA30 Operator's Manual page 20

AIR FILTER
Your engine will not run properly using a
dirty air filter. Service air cleaner more often
under dusty conditions. See engine manual.
CLEAN AIR SCREEN
Air screen must be kept free of dirt and chaff
to prevent engine dam age from overheating.
Clean with a wire brush or compressed air to
re move dirt and stub born dried gum fibers.
CLEAN AIR INTAKE/COOL ING AREAS
To ensure proper cooling, make sure the
grass screen, cooling fins, and other exter-
nal surfaces of the engine are kept clean
at all times.
Every 100 hours of operation (more often
under extremely dusty, dirty conditions),
remove the blower housing and other cooling
shrouds. Clean the cooling fins and external
surfaces as necessary. Ensure the cooling
shrouds are re in stalled.
NOTE: Operating the engine with a blocked
grass screen, dirty or plugged cooling fins,
and/or cooling shrouds re moved will cause
engine damage due to overheating.
CLEANING FRICTION SURFACES
To ensure proper drive performance keep
the friction surfaces free from dirt, chaff and
excess rubber at all times.
Every 25 hours of operation, the friction
surfaces need to be rubbed clean with
isopropyl alcohol or other non-filming cleaner.
Engine Plate
Friction Disc
MUFFLER
Inspect and replace corroded muffler and
spark arrester (if equipped) as it could create
a fire hazard and/or dam age.
SPARK PLUG(S)
Replace spark plug(s) at the beginning of
each mowing season or after every 100
hours of operation, whichever occurs first.
Spark plug type and gap setting are shown
in "PROD UCT SPEC I FI CA TIONS" section
of this manual.
CLEANING
• Clean engine, battery, seat, finish, etc. of
all foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfaces with au to mo tive
type wax.
We do not recommend using a garden hose
or pressure washer to clean your riding
mower unless the engine and transmission
are covered to keep water out. Water in en-
gine or transmission will shorten the useful
life of your riding mower. Use compressed
air or a leaf blower to remove grass, leaves
and trash from riding mower and mower.
20
OPERACIÓN
Estos símbolos pueden aparecer en la cortadora de césped o en la literatura provista con el pro-
ducto. Aprenda y entienda su significado.
MARCHA ATRÁS NEUTRO ALTO
MOTOR
SISTEMA MOTOR
APAGADO
FUNCIONAMIENTO ENCENDIDO
ATRÁS (ROS)
COMBUSTIBLE PRESIÓN
SOBRE LUZ DE
DEL ACEITE
TEMPERATURAS
ACCESORIO DEL ACCESORIO DEL
PELIGRO, GUARDE LAS
EMBRAGUE
EMBRAGUE
MANOS Y LOS PIES LEJOS
ENGANCHADO DESENGANCHADO
CONTROL DE
RUEDA LIBRE
DESACTIVADO
PEDAL DE
FRENO/EMBRAGUE
CONTROL DE
RUEDA LIBRE
ACTIVADO
No seguir las siguientes instrucciones
puede provocar heridas o muerte. Los
símbolos de aviso de seguridadse utilizan
para identificar informaciones de seguridad
relativas a peligros que puedenprovocar la
muerte, heridas graves y/o daños a la
máquina.
RÁPIDO LENTO
BAJO ESTRANGU-
LACIÓN
P
MOTOR FRENO DE
PRESIÓN
EN MARCHA MANO SE CERRÓ
DEL ACEITE
MARCHA MARCHA ALTURA DE LA
BATERÍA
SEGADORA
ATRÁS HACIA ADELANTE
15
MANTENGA EL MANTENGA EL
AREA DESPEJADA AREA DESPEJADA
(Vea la sección de las reglas de seguridad)
PELIGRO indica un peligro que, si no se evita,
provoca muerte o lesiones graves.
ADVERTENCIA indica un peligro que, si no se evita,
puede provocar muerte o lesiones graves.
PRECAUCIÓN indica un peligro que, si no se evita,
puede provocar lesiones ligeras o moderadas.
PRECAUCIÓN cuando se utiliza sin el símbolo de
aviso, indica una situación que puede provocar
daños al tractor y/o al motor.
SUPERFICIES CALIENTES indica un peligro que,
si no se evita, puede provocar la muerte, lesiones
graves y/o danos a la máquina.
FUEGO indica un peligro que, si no se evita, puede
provocar la muerte, lesiones graves y/o danos
a la máquina.
37
INTERRUPTOR
DE IGNICIÓN
FRENO DE
MANO ABIERTO
LEVANTAMIENTO
DE LA SEGADORA
15
PELIGROS DE
PENDIENTES