Optional Equipment Connections; Vcr Connection; Front Control Panel - Panasonic CT-36SX12U Operating Instructions Manual

OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the
optional equipment manual for more information.
Note: Input 1 is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the
Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite
video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks, The on-screen label will display
Component or Video I depending on which source is connected,
! I I
,L_'_ f'_l i
_e
-- I
L J I I
CABLES NOT SUPPLIED L __ -- __ J I
TERMINALS ON BACK OF THE "IV
INPUT 1
CC_MPONENT
_'IDEO INPUTS
I
) VIDEO/Y _
INPt.rr 2
S-VIDEC
O'
VIDEO 0
L Auc4o,J
-- Use either the
S-Video,_or
Video
I L I
i To'_u,=o,_ I
O I
L .............
Note: The remote control must be programmed with supplied codes to operate the VCR.
Procedure
1, Connect equipment as shown to rear AudioNideo input jacks.
2. Select the Video mode by pressing TV/VIDEO button.
3. Operate optional equipment as instructed in equipment manual.
Front Control Panel
W/VIDEO
Press (_ to select VIDEO 3 input mode.
Note: The front control panel located behind the customer control door can be used to access menus and switch video mode when
the remote control is not available.
ON/OFF INDICATOR Note: The ON/OFF indicator LED (red) wiflbe lit when set is on.
I " II
aurelian
Note: The S-VIDEO connection provides higher quality picture. It _
overrides VIDEO 3 connections. Use INPUT 3, AUDIO L _'_-_--FJ=
and R with S-VIDEO connection.
CAMCORDER
A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
Procedure
1. Connect equipment to front AudioNideo input jacks.
2. Press W/VIDEO button to select VIDEO 3 input mode.
3. Operate optional equipment as instructed in equipment manual.
60