Table of Contents
Advertisement
Channel
Caption
ACTION
Displays and Exits Menus
Located On Remote Control
Channel
Caption (Station Identifier)
This feature allows you to enter the call names of up to
30 stations into memory (using up to 4 characters for
each station). The call name will then display along with
the channel number when changing channels or press-
ing RECALL.
CH 03
I
Xyyz._._Channel
Caption
Station Identifier)
Selects or Adjusts
Features When
Menu is Displayed
Selects Desired
Menu is Displayed
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH DOWN and VOL RIGHT buttons to
select the Channel Caption Icon.
3.
Press the ACTION button to display the Channel
Caption Menu.
1CHANNEL CAPTION I
ENTER CHANNEL NUMBER
3
ENTER CAPTION
•
TO MOVE
• I_ TO SELECT
•
CURSOR
CHARACTER
Helpful
Hints:
When the Maximum amount of station identifiers are
entered, "FULL" will be displayed in the characters
position.
4.
Press the VOL LEFT or RIGHT button, or use the
Remote Control Keyboard, to enter channel number
you wish to assign a Station Identifier.
5.
Press the CH DOWN button to select "ENTER
CAPTION".
6.
Press the VOL LEFT or RIGHT button to select first
character in Station Identifier. Then press the CH
DOWN button to move cursor to the second position
and repeat until the complete Station Identifier is
entered (up to 4 characters).
7.
Pressthe CH UP or DOWN button to select"ENTER
CHANNEL NUMBER". Then repeat steps 4 through
6 to continue adding Channel Station Identifier(s).
8.
Press the ACTION button twice to exit the Channel
Caption Menu.
NOTE: To delete a Channel Caption (Station Identifier)
from memory all four character positions must
display dash mark (-).
- 27 -
Advertisement
Table of Contents
