Table of Contents
Advertisement
11. Turn on any other external devices you will use before you
turn on the Macintosh. (Always turn on the scanner before
turning on the computer.)
The scanner's Ready light goes out when you turn on the
computer, flashes for a moment, and then comes on
again once the computer boots.
Installing the e Paper Software Suite
Before you install the e Paper software suite, it's a good idea to
make backup copies of your disks.
Make sure your Macintosh is turned off and then follow these
steps to install the suite:
1. Turn on your scanner.
2. Hold down the Shift key on your keyboard as you turn on
your Macintosh to turn off its system extensions and virus
protection programs. Release the Shift key when you see
the "Welcome to Macintosh Extensions off" screen.
3. Insert the Installation Disk 1 into your diskette drive. (If the
e Paper Install 1 screen does not appear, double-click the
e Paper Install 1 disk icon.)
4. Double-click the e Paper Installer icon. When you see the
initial installation program screen, click Continue.
5. Click Continue to accept the license agreement.
6. Click Yes to restart your Macintosh after installation.
7. Click Hard disk.
7
Getting Started
Advertisement
Table of Contents
