Table of Contents
Advertisement
7. If you are connecting the scanner directly to your Macintosh,
connect the 25-pin connector on the dual-connector end of
the cable to the SCSI port on the Macintosh; this port has
a
icon above it. Tighten the two screws on the sides of
the connector.
If you are connecting the scanner to another SCSI device in a
daisy-chain, connect the 50-pin connector on the cable to
the SCSI device.
5
Getting Started
Advertisement
Table of Contents
Need help?
Do you have a question about the Grayscale Scanner and is the answer not in the manual?
Questions and answers