Table of Contents
Advertisement
5. The scanner's SCSI terminator is set to ON at the factory.
If the scanner is the only or last device in the SCSI
daisy-chain, leave the terminator at this setting. If the
scanner is at the beginning or in the middle of a
daisy-chain, turn the terminator switch OFF.
6. Connect the 25-pin connector to the SCSI connector on the
scanner and tighten the screws on each side.
plus button
minus button
Getting Started
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Grayscale Scanner and is the answer not in the manual?
Questions and answers